My C-208 Loudspeakers are in great condition, with minimal use. They have been refurbished to look and act as new, and work in all test cases. The C-208 is loaded with double 8″ LF/MF and a single high energy HF driver. Each enclosure is constructed of high grade birch plywood and is custom fitted with steel fly hardware that has been test rated for a 7:1 static load, hanging up to 16 enclosures in a single array. Our user friendly hardware allows for hanging and ground stacking applications, permitting the user to stack up to six enclosures. All C-208 enclosures are hand wired using premium 14 gauge wire and Neutrik brand NL8 connectors. All drivers are built with cast fame baskets for strength and longevity. Our compression drivers have replaceable titanium diaphragms for superb sound quality, performance and durability. We use a standard phase plug design to control the isophasic wave form as well as a wave guide system for smooth coverage and coupling. Our components are designed and built to a commercial standard and have a proven track record on tours ranging from stadiums to festivals of up to 30 shows per month with practically a nonexistent failure rate. All C-208 enclosures are equipped with a removable back panel that can be disconnected and replaced by an internal TVi multi channel “Class D” power amplifier module. Each power amplifier has a built in multi-channel processor that has been chamber tuned for the C-208 to achieve a flat response curve with pre set limiters, DSP and crossover points. One amplified C-208 enclosure will also power one additional non-powered C-208 enclosure in tri amp mode by daisy chaining an NL8 cable. SPECIFICATIONS C-208 Biamp/Full-Range Switchable (NL4) 2×8″, 1×1.7″ diaphragm Frequency Response (+/-3 dB) 90 Hz – 19 kHz Program Power (watts) LF-300, LF2-300, HF-130 RMS Power (watts) LF-150, LF2-150, HF-65 SPL & Sensitivity (1w/1m) 126dB / 101dB Coverage Angle 90 x 10 degrees Nominal Impedance Full-Range: 16Ohm, Biamp: HF 8ohm, LF 8ohm Dimensions (HxWxD) 25.27″ x 13″ x 9.64/7.71″ Weight & Material 50.70 lbs 3/4″ birch plywood