Complete original Audio-Technica ATM35 system: microphone, integrated mic cable, clip-on gooseneck holder, windscreen, AT8532 power module and carrying pouch. Tested, fully functional. Very light use, top condition. I am the original owner. Features: * Clips to brass, reeds, piano, acoustic bass, snare, and toms * Crisp, clear, well-balanced response, even at high SPLs * UniMount clip permits accurate positioning while protecting element * Operates on battery or phantom power Specifications: * Element: Fixed-charge back plate, permanently polarized condenser * Polar Pattern: Cardioid * Frequency Response: 30-20,000 Hz * Low Frequency Roll Off: 150 Hz, 12 dB/octave * Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa * Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D. * Dynamic Range: 118 dB, 1 kHz at Max SPL * Signal-to-Noise Ratio: 67 dB, 1 kHz at 1 Pa * Phantom Power Requirements: 11-52V DC, 2 mA typical * Battery Type: 9V * Battery Current/Life: 1 mA / 1000 hours typical * Switches: * On-flat, on-roll-off (phantom) * Off, on-flat, on-roll-off (battery) * Weight (Microphone): 0.3 oz (8.5 g) * Weight (Power Module): 5.4 oz (153 g) * Cable: 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module * Dimensions (Power Module): 3.78" (96.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D * Dimensions (Microphone): 1.39" (35.2 mm) long, 0.47" (12.0 mm) diameter * Output Connector (Power Module): Integral 3-pin XLR male